Are these mirrors suitable for outdoor use?

Yes. The polycarbonate surface is UV stabilised and the rim carries a weather seal, rated from -30 to 60 degrees C. Cheaper acrylic convex mirrors yellow and craze outdoors within one or two seasons, which is the usual reason for early replacement.

What diameter should be specified?

As a working rule: 600 mm for indoor forklift aisles and retail corners, 800 mm for car parks and outdoor vehicle routes, and the quarter dome for ceiling corners in retail. Viewing distance drives the choice; send the sight-line distance and we will advise.

Can these be branded or colour-matched?

Yes, from 500 pcs. The rim can be produced in a custom colour and the mirror face can carry a printed warning legend, which is common for car-park operators and industrial safety programs.

600 mm Warehouse Convex Safety Mirror

SKU MW-CX-02 · Specialty Mirrors

Minimum order1 pcs
Lead time25-30 days
Unit priceOn request (FOB / EXW)

Replies within 24 hours · NDA available for OEM projects

Car parks, loading bays and access ramps
Warehouse and distribution forklift aisles
Retail loss prevention at aisle ends
Factory, hospital and campus blind corners

Specifications

Full Technical Specifications

Overview

A 600 mm convex mirror with a UV-stabilised polycarbonate face, a black ABS rim and a single-axis straight-arm bracket, sized for indoor forklift aisle intersections.

Wide-angle convex mirrors for car parks, warehouses, blind corners and retail loss prevention, sold through industrial and safety-equipment channels.

Technical Specifications

Parameter	Value
Model	MW-CX-02
Diameter	600 mm
Rim	Black ABS
Bracket	Single-axis straight arm
Mirror surface	Impact-resistant polycarbonate with reflective coating
Format	Circular full dome, or ceiling-corner quarter dome
Viewing angle	Approximately 160 degrees on circular models
Frame	High-visibility orange or black ABS rim with weather seal
Environment	Rated for outdoor use, UV stabilised, -30 to 60 degrees C
Compliance documents	Supplier RoHS and REACH material declarations
Packaging	EPE corner protection, honeycomb board and five-layer carton; ISTA 3A tested
Warranty	3 years against cracking and coating failure
Customisation	Custom sizes, frame finishes, logo and retail packaging; OEM and ODM accepted
Minimum order quantity	1 pc
Lead time	25-30 days

Applications

Car parks, loading bays and access ramps where drivers need sight lines around a blind corner or a column.
Warehouses and distribution centres at forklift aisle intersections, which is the highest-frequency application.
Retail loss prevention at aisle ends and ceiling corners.
Factories, hospitals and campuses at internal blind corners and vehicle crossings.

Features & Advantages

Polycarbonate rather than glass, so an impact does not create a glass hazard in a traffic or pedestrian area.
UV stabilised for outdoor service; uncoated acrylic convex mirrors yellow and craze within a couple of seasons outdoors.
Dual-axis galvanised bracket allows the mirror to be aimed precisely after installation, then locked.
High-visibility orange rim is specified in most car-park and traffic applications; black is available for retail interiors.

Supply Terms

Minimum order quantity 1 pc; mixed orders across models count toward the same container.
Lead time 25-30 days from deposit or sample approval, whichever is later; pre-production samples in 7 days.
OEM and ODM accepted: custom sizes, finishes, logo and retail packaging.
ISTA 3A tested packaging with a 3% free spare-parts kit on every order.
FOB, CIF, CFR, DDP and EXW supported; quotation returned within 24 hours.